中空玻璃線的選型可以從如下幾個方面進行考量 按照中空玻璃尺寸，現在場上中空玻璃線的大致分為18，22、25和27，者可根據自己家玻璃的大小來進行。如果工程只針對門窗工程，選擇22米以下的中空玻璃線即可完全滿足工程客戶對中空玻璃的需求。如果主要以幕墻工程為主，應選擇22米以上的中空線，否則超大玻璃將無法解決。

The selection of insulating glass lines can be considered from the following aspects according to the size of insulating glass. Currently, the types of insulating glass lines on the market are roughly divided into 18, 22, 25, and 27, which can be determined based on the size of your own glass. If the project is only aimed at door and window engineering, selecting insulated glass lines below 22 meters can fully meet the needs of engineering customers for insulated glass. If curtain wall engineering is the main focus, hollow lines above 22 meters should be selected, otherwise oversized glass will not be able to solve the problem.

按照合片類型，中空玻璃線分為外合片、內合片及內外合片三種類型。外合片的優點是可以內置隔條和內頁百葉窗的中空玻璃。內外合片的優點為兼具了內合片和外合片的功能和優點，適合做任何形式的中空玻璃，如果資金充足的話，建議選擇此種類型的中空玻璃線;內合片的優點為合片方式和性能比較穩定，定位準確，可以中空玻璃大小片，而外合片則不能，另外內合片方式的中空線造價相對較低，比較經濟適用，符合剛起步的中空玻璃家采用。

According to the type of lamination, hollow glass wire can be divided into three types: outer lamination, inner lamination, and inner and outer lamination. The advantage of the outer panel is that it can be equipped with insulating glass with built-in partitions and inner louvers. The advantage of internal and external lamination is that it combines the functions and advantages of both internal and external laminations, making it suitable for making any form of insulating glass. If there is sufficient funds, it is recommended to choose this type of insulating glass line; The advantages of internal lamination are that the lamination method and performance are relatively stable, with accurate positioning, which can accommodate large and small pieces of insulating glass, while external lamination cannot. In addition, the cost of the central line of the internal lamination method is relatively low, making it more economical and applicable, which is in line with the adoption of insulating glass by beginners.

立式中空玻璃線產量日班產可達1千片左右，臥式中空線效率比較低，與立式相比差距在50，而且占用人力也比較多，已屬淘汰機型。相比較而言，立式中空線各方面的優勢更為明顯。

The daily production of vertical hollow glass lines can reach about 1000 pieces. The efficiency of horizontal hollow lines is relatively low, with a gap of 50 compared to vertical lines, and it also takes up a lot of manpower, making it an outdated model. By comparison, the advantages of vertical overhead lines in various aspects are more obvious.

在中空玻璃的流程中，有些工藝是可以用人工來實現的，比如切割玻璃、雙組份打膠、分子篩灌裝等都可以用手工來實現。如果前期資金困難，可以暫不配置相關設備，但要想做出合格的中空玻璃，必備的一條立式中空玻璃線和丁基膠涂布機是必不可少的。當然，高質量的中空玻璃沒有性能優越的中空玻璃設備是難以實現的。

In the process of insulating glass, some processes can be achieved manually, such as cutting glass, two-component gluing, molecular sieve filling, etc. If the initial funding is difficult, relevant equipment may not be configured temporarily. However, in order to produce qualified insulating glass, a vertical insulating glass line and a butyl adhesive coating machine are essential. Of course, high-quality insulating glass is difficult to achieve without high-performance insulating glass equipment.

本文由中空玻璃生產線整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊：http://www.365cool.cn我們會有更多精彩內容等你查看。

This article is organized and published by the insulating glass production line. Do you have any understanding of these contents? For more information, please click on: http://www.365cool.cn We will have more exciting content waiting for you to check out.